AUTO LOCKSMITHS
Autowave launches step-by-step tutorials:
Peugeot Boxer 2023 transponder clone first up
In a new series of written step-by-step guides, Autowave is delighted to support workshop technicians and locksmiths with clear, detailed instructions on how to get the most from their replacement key and programming equipment.
From individual vehicle transponder cloning to advanced diagnostics, key coding and remote programming, this content is an invaluable resource for professionals looking to save time, reduce errors, tackle specific vehicles and expand their capabilities with confidence.
You’ ll need the following:
• Original working key
• SIP22 blank key( ready for cutting)
• Xhorse Superchip( XT27)
• Xhorse Key Tool Max Pro
• Wi-Fi connection( for online calculation)
» TO START THE SERIES, Autowave’ s Ravi Kotecha explains how to clone a transponder on a Peugeot Boxer 2023.
Step one: Verify the original key works
Insert the original key into the ignition and start the vehicle to confirm it functions correctly.
Step two: Check clonability
On the Key Tool Max Pro device, navigate to the main screen and choose the‘ Transponder Clone’ option. Insert the original key into the transponder coil of the device and tap‘ Read Transponder’. This will identify the chip type; in this case, it will read as an‘ ID46 transponder’. The system will confirm if the chip is cloneable; if it shows‘ Clone Status: Cloneable’, proceed by tapping‘ Clone’.
Step three: Begin cloning process
Follow the cloning instructions as prompted: confirm that you’ re using the original key and then place the device’ s antenna near the ignition coil to begin data collection. After a few seconds, the screen will display‘ Data Acquisition Complete’. You’ ll then be asked to
58
JULY 2025
locksmithjournal. co. uk Issue Takeover