Surface World November 2019 Surface World November 2019 | Page 42
PUMPS & FILTRATION
SIEBEC L-TECH ® PLEATED HIGHFLOW
CARTRIDGES for Electroplating Filters
The L-TECH ® fi ltration
cartridges are being
used successfully on
many different plating
solutions including
Zinc, Nickel, Tin, Copper
and Chrome. This brief
article explains the
benefi ts of L-TECH ®
cartridge for high quality
Nickel plating delivering
high quality and low
operational cost.
DIRT HOLDING CAPACITY. The
L-TECH ® large pleated cartridge is a
surface filter, capturing dirt/sludge on
the surface which is one of the reasons
why the L-TECH ® cartridge is simple to
clean and re-use. With a massive 5m²
of surface area, a large amount of
sludge/dirt can be retained before fully
loaded. When compared to wound
cartridges the L-TECH ® last longer,
maintains a high flow rate at low micron
ratings as the pressure differential
increases at a steady rate as the
cartridge loads. Trials show that the
L-TECH 1µ will remove 4 times as
much dirt/sludge as the equivalent
volume of 1µ wound cartridges and
maintain a higher actual flow rate
through the filter for much longer.
As cartridges are fabricated from
100% pure material, they do not
need any antistatic agents for their
manufacture, so they will not introduce
organics into the plating solution.
FILTRATION EFFICIENCY at nominated
porosity. The 1µ L-TECH ® is rated β300
meaning the efficiency is at least 99.6%
efficient so virtually no particulates greater
than the rated pore size pass through
the filter media from start-up. Typically,
wound cartridges are 70% efficient so from
every 100 particulates who’s size is equal
to or greater than the nominal size (µ),
40
30 will pass through the media which are
larger or equal to the nominal µ. If you require any additional
L-TECH BENEFITS - Long service intervals
between media changes, re-use of the media,
greater process quality, lower labour costs and
delivering a minimal hazardous waste option. or SIEBEC products please contact
NOVEMBER 2019
®
information on the L-TECH® cartridge
SIEBEC UK email [email protected]
or phone 01785 227700.
twitter: @surfaceworldmag