NORDSON
Encore HD with Nordson Dynamic Contouring Movers
Efficiency increase and cost
reduction in powder coating
Achieve superior coverage by
bringing the soft spray of our Encore
HD spray system closer to the most
difficult to reach product areas.
The Nordson Dynamic Contouring Mover (DCM)
System combined with the soft spray increases the
automatic coverage of complex forms and achieves
the highest process control in your powder coating
application. The DCM System automatically detects
the product geometry and delivers superior coating
performance by adjusting the position of each spray
gun – and all this without any programming.
Product geometries are scanned with the highest
level of accuracy detecting protrusions larger than 5
mm at a line speed of up to 5 m/min*. The
information is quickly processed by the PowderPilot
HD system controller and sent to the DCM. The
smooth operation of the DCM System has a
positioning speed of up to 500 mm/sec and
accuracy of ± 1 mm to bring the soft spray to the
optimum distance of the target product surfaces.
The result is superior coverage of complex shapes.
The benefits of the DCM System are
Optimize automatic powder coating of
complex products
Reduce powder consumption by improving
the applied coating uniformity
Increase productivity by reducing touch-up
The Nordson Dynamic Contouring Mover
(DCM) systems for superior automatic
powder coating performance.
162 2020 - 2021 read online: www.surfaceworld.com