Subaru WRX & WRX STI Manuals 2018 WRX & WRX STI Owner’s Manual | Page 206

3-68
Instruments and controls/Light control switch
– surrounding situation (e.g., the
movement and direction of an oncom-
ing vehicle or vehicle ahead)
– detection limitations of the camera
angle
& Headlight flasher
& Daytime running light system
WARNING
When the daytime running lights are
illuminated, the tail lights do not
illuminate. When it becomes dark
outside, turn the light switch to the
“ ” position to illuminate the head-
lights and tail lights. This will im-
prove visibility and allow other dri-
vers to see your vehicle more easily.
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works
even though the lighting switch is in the
“ ” (off) position.
When the headlights are on high beam,
the high beam indicator light “ ” on the
combination meter is also on.
The daytime running lights will automati-
cally illuminate when the following condi-
tions are fulfilled.
. The engine is running.
. The parking brake is fully released.
. The light control switch is in the
” or off position.
“AUTO” (if equipped), “
. For CVT models, the select lever is in a
position other than the “P” position.
NOTE
When the light switch is in the “
”
position, the instrument panel illumina-
tion, front side marker lights, tail lights
and license plate lights are also illumi-
nated.