Subaru WRX & WRX STI Manuals 2017 WRX & WRX STI Owner’s Manual | Page 445

7-70 Starting and operating/Reverse Automatic Braking System NOTE 4) After the vehicle has been stopped by the system: Make sure to depress the brake pedal after the vehicle has been stopped by automatic braking. Until the brake pedal is depressed, a message will be displayed on the multi function display and the continuous beep will remain sounding. After the brake pedal is depressed, the Reverse Automatic Braking system OFF indicator will illuminate and the system will temporarily stop operating. The Reverse Automatic Braking system OFF indicator will turn off when the select lever is shifted to a position other than the “R” position. The system will operate again the next time the select lever is shifted to “R” position. . In the following cases, after the vehicle has been stopped by the Reverse Automatic Braking system, brake control is released and the electronic parking brake operates. For details about releasing the parking brake, refer to “Electronic parking brake (models with electronic parking brake system)” F7-44. – When 2 minutes pass after the vehicle is stopped – When any door is opened – When the EyeSight system malfunctions – When the EyeSight system stops temporarily – When the Reverse Automatic Braking system malfunctions – When the Reverse Automatic Braking system stops temporarily & Canceling the Reverse Automatic Braking system operation The Reverse Automatic Braking system can be temporarily cancelled by any of the following operations. . While automatic braking is in operation, the brake pedal is depressed . While automatic braking is in operation, the accelerator pedal is depressed . When automatic deceleration is in activation, the accelerator pedal is depressed hard . The select lever is shifted to a position other than the “R” position NOTE The system will be cancelled if the object is no longer detected. & Reverse Automatic Braking system ON/OFF setting While the select lever is shifted to the “R” position, the below functions of the Reverse Automatic Braking system can be set by operating the multi function display. For details about how to operate the multi function display, refer to “Basic operation” F3-50.