Subaru WRX & WRX STI Manuals 2017 WRX & WRX STI Owner’s Manual | Page 174

Instruments and controls/Multi information display

& Basic operation

3-39

& Welcome screen

By operating “ ” or “ ” of the control
switch, the screens and selection items
can be switched. When the “ /SET”
switch is pulled toward you, the item can
be selected and set.

Control switch
1) Up (select)
/SET (enter)
2)
3) Down (select)

The warning screen will return to the
original screen after a few seconds. While
the “ ” information reminder is on the
display, it may be possible to display the
warning screen again. To recall the message marked with “ ” on the display, pull
the “ /SET” switch on the steering wheel
toward you.

If there are some useful messages, such
as vehicle information, warning information, etc., they will interrupt the current
screen, and appear on the display accompanied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
When the door is unlocked, and the
driver’s door is opened and then closed,
the welcome screen will appear for approximately 20 seconds.

NOTE
. Once the welcome screen appears,
it takes a certain period of time to
display it again.
. The welcome screen will disappear
when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.
. If any of the doors is opened while
the welcome screen is displayed, the
door ajar warning will appear.
. The welcome screen can be set to
on or off. For details, refer to “Welcome
– CONTINUED –