Subaru WRX & WRX STI Manuals 2017 WRX & WRX STI Owner’s Manual | Page 129

2-36

Keys and doors/Windows

the window halfway, press the switch
down lightly.

! Operating the rear passenger’s
windows

If the vehicle’s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions will
be deactivated.
. One-touch auto up/down function
. Anti-entrapment function
. Operation of the front passenger’s
window switch located on the driver’s side
power window switch cluster

NOTE
If the vehicle’s battery is disconnected
due to situations such as battery or
fuse replacement, the one-touch auto
up/down function is deactivated. Initialize the power window to reactivate
the one-touch auto up/down function.
Refer to “Initialization of power window” F2-36.
! Anti-entrapment function
Refer to “Anti-entrapment function” F234.

& Initialization of power window

To open:
Press the switch down and hold it until the
window reaches the desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
When the lock switch on the power
window switch cluster, located on the
driver’s side door, is in the lock position,
the passengers’ windows cannot be operated with the passengers’ switches.

Initialize the driver’s and front passenger’s
power window using the following procedure to reactivate these functions.
1. Close the door.
2. Turn the ignition switch to the “ON”
position.
3. Open the window halfway by pressing
down the power window switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed completely.
5. Open the window completely by fully
pressing down the power windows switch.