Subaru WRX & WRX STI Manuals 2016 WRX & WRX STI Owner’s Manual | Page 444

Starting and operating/Cruise control

U.S.-spec. models
The set speed can be increased 1 mph
(1.6 km/h) each time by pressing the
“RES/SET” switch to the “RES” side
quickly.

Sport (S) mode is selected, the transmission will operate like a conventional
automatic transmission.
! To decrease the speed (by the
“RES/SET” switch)

Except U.S.-spec. models
The set speed can be increased 1 km/h
each time by pressing the “RES/SET”
switch to the “RES” side quickly.
! To increase the speed (by accelerator pedal)
1. Depress the accelerator pedal to
accelerate the vehicle to the desired
speed.
2. Press the “RES/SET” switch to the
“SET” side once. Now the desired speed
is set and the vehicle will keep running at
that speed without depressing the accelerator pedal.

NOTE
CVT models:
. If you depress the accelerator pedal
while the Sport Sharp (S#) mode is
selected, the select lever/gear position
indicator may change from the “D”
indication to the current gear position
indication.
. If you depress the accelerator pedal
fully while the Intelligent (I) mode or the

7-55

each time by pressing the “RES/SET”
switch to the “SET” side quickly.
! To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the “RES/SET”
switch to the “SET” side once. Now the
desired speed is set and the vehicle will
keep running at that speed without depressing the accelerator pedal.

& Cruise control indicator
Refer to “Cruise control indicator” F3-35.

& Cruise control set indicator
Press the “RES/SET” switch to the “SET”
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and t