Subaru WRX & WRX STI Manuals 2016 WRX & WRX STI Owner’s Manual | Page 125

2-36

Keys and doors/Trunk lid

& Initialization of power window
If the vehicle’s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions will
be deactivated.
. One-touch auto up/down function
. Anti-entrapment function
Initialize the power window using the
following procedure to reactivate these
functions.
1. Close the driver’s door.
2. Turn the ignition switch to the “ON”
position.
3. Open the driver’s side window halfway
by pushing down the power window
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed completely.
5. Open the driver’s side window completely by fully pushing down the power
windows switch.

Trunk lid
WARNING
. To prevent dangerous exhaust
gas from entering the vehicle,
always keep the trunk lid closed
while driving.
. Help prevent children, adults or
animals from locking themselves
in the trunk. On hot or sunny
days, the temperature in the
trunk could quickly become high
enough to cause death or serious
heat-related injuries including
brain damage to anyone locked
inside, particularly for small children.
. When leaving the vehicle, close
all windows and lock all doors.
Also make certain that the trunk
is closed.

push-button start system”, refer to “Opening trunk” F2-15.
. For models without “keyless access
with push-button start system”, refer to
“Opening the trunk lid” F2-23.
To close the trunk lid, lightly press the
trunk lid down until the latch engages.

NOTE
Do not leave your valuables in the
trunk when you leave your vehicle.

& To open the trunk lid from
inside

& To open and close the trunk
lid from outside
The trunk lid can be opened using the
keyless access function or remote keyless
entry system. For details, refer to the
following section.
. For models with “keyless access with

Press the trunk lid opener switch for more
than 1 second.