Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 462

Maintenance and service/Battery replacement

Battery replacement
The access key / transmitter battery may
be discharged under the following conditions.
. The operation of the keyless access
function is unstable
. The operating distance of the remote
keyless entry system is unstable
. The transmitter does not operate properly when used within the standard distance
Replace the battery with a new one.

CAUTION
. Do not let dust, oil or water get on
or in the access key/transmitter
when replacing battery.
. Be careful not to damage the
printed circuit board in the access key/transmitter when replacing the battery.
. Be careful not to allow children to
touch the battery and any removed parts; children could
swallow them.
. There is a danger of an explosion
if the battery is incorrectly replaced. Replace only with the

same or equivalent type of the
battery.
. Do not expose batteries to excessive heat such as bright sunlight, fire or the like.

11-49

& Replacing access key battery
Battery: Button battery CR1632

NOTE
. Replace only with the same or
equivalent type of battery recommended by the manufacturer.
. Dispose of used batteries according
to local laws.
. Mount the battery in the correct
orientation to prevent fluid leakage.
Be careful not to bend the terminals. It
may result in a malfunction.
. It is recommended that the battery
should be replaced by a SUBARU
dealer.
. Use a new battery.
. After replacing the battery, confirm
that the access key/transmitter functions properly.

1. Pull out the mechanical key.

2. Insert the key into the gap and turn it
clockwise to remove the cover.
– CONTINUED –