Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 440

Maintenance and service/Brake pedal

Brake pedal

& Checking the brake pedal
reserve distance

11-27

Clutch pedal (MT models)

Check the brake pedal free play and
reserve distance according to the maintenance schedule in the “Warranty and
Maintenance Booklet”.

Check the clutch pedal free play and
reserve distance according to the maintenance schedule in the “Warranty and
Maintenance Booklet”.

& Checking the brake pedal
free play

& Checking the clutch function

1)

1)

0.02 – 0.08 in (0.5 – 2.0 mm)

Stop the engine and firmly depress the
brake pedal several times. Lightly pull the
brake pedal up with one finger to check
the free play with a force of less than 2 lbf
(10 N, 1 kgf).
If the free play is not within proper
specification, contact your SUBARU dealer.

More than 2.56 in (65 mm)

Depress the pedal with a force of approximately 66 lbf (294 N, 30 kgf) and measure
the distance between the upper surface of
the pedal pad and the floor.
When the measurement is smaller than
the specification, or when the pedal does
not operate smoothly, contact with your
SUBARU dealer.

Check the clutch engagement and disengagement.
1. With the engine idling, check that there
are no abnormal noises when the clutch
pedal is depressed, and that shifting into
1st or reverse feels smooth.
2. Start the vehicle by releasing the pedal
slowly to check that the engine and
transmission smoothly couple without
any sign of slippage.

– CONTINUED –