Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 418

Maintenance and service/Maintenance tips

on it, etc. Deformation of the
insulator and its mount may
occur.

& When checking or servicing
in the engine compartment
while the engine is running
WARNING

CAUTION
. Do not contact the drive belt
cover while checking the components in the engine compartment. Doing so may cause your
hand to slip off the cover and
result in an unexpected injury.
. Do not touch the oil filter until the
engine has cooled down completely. Doing so may result in a
burn or other injury. Note that the
oil filter becomes very hot when
the engine is running and remains hot for some time after
the engine has stopped.
. Do not apply force on the fender
insulator by placing your hands

A running engine can be dangerous.
Keep your fingers, hands, clothing,
hair and tools away from the cooling
fan, drive belt and any other moving
engine parts. Removing rings,
watches and ties is advisable.

11-5

Maintenance tips
Some clips and fender linings must be
removed before replacing the air cleaner
elements or specific bulbs.

& Removing and reinstalling
clips
! Removing clips
There are several types of clips used for
your vehicle.
! Type A clips

1. Turn the clips counterclockwise using
a flat-head screwdriver until the center
portion of the clip is raised.
2. Remove the clips with a flat-head
screwdriver using leverage.
– CONTINUED –