Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 406

In case of emergency/Moonroof – if the moonroof does not close

push-button ignition switch then changes
to “ON”.

NOTE
If the power does not switch even
though the above procedure was followed precisely, contact your SUBARU
dealer.

& Starting engine
1. Apply the parking brake.
2. Shift the shift lever into neutral (MT
models) or the select lever into the “P”
position (CVT models).
3. Depress the brake pedal.
4. Depress the clutch pedal (MT models).

5. Hold the access key with the buttons
facing you, and touch the push-button

ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound. At the same
time, the push-button ignition switch turns
to the “ACC” or “ON” position.
6. Within 5 seconds after the push-button
ignition switch turns to the “ACC” or “ON”
position, while depressing the brake pedal
(all models) and the clutch pedal (MT
models), press the push-button ignition
switch.

NOTE
If the engine does not start even
though the above procedure was followed precisely, contact your SUBARU
dealer.

9-17

Moonroof (if equipped) – if
the moonroof does not close
If the moonroof does not close, we
recommend that you have the system
checked by a SUBARU dealer.