Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 403

9-14

In case of emergency/Towing

After towing, remove the towing hook from
the vehicle and stow it in the tool bucket.
Fit the towing hook cover on the bumper.

Rear tie-down holes:

the plugs. After using the rear tie-down
holes, return the plugs to their original
places.

WARNING

WARNING

Use the rear tie-down holes only for
downward anchoring. If they are
used to anchor the vehicle in any
other direction, cables may slip out
of the holes, possibly causing a
dangerous situation.

Do not use the towing hook except
when towing your vehicle.
Front tie-down hooks:

& Using a flat-bed truck

The front tie-down hooks are located
between each of the front tires and the
front bumper.
1)

Rear tie-down hole

The rear tie-down holes are located near
each of the jack-up reinforcements.
There is a plug in each rear tie-down hole.
To use the rear tie-down holes, remove

This is the best way to transport your
vehicle. Use the following procedures to
ensure safe transportation.
1. Shift the select lever into the “P”
position for CVT models. Shift the shift