Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 377

7-50 Starting and operating/Cruise control U.S.-spec. models The set speed can be increased 1 mph (1.6 km/h) each time by pressing the “RES/SET” switch to the “RES” side quickly. Sport (S) mode is selected, the transmission will operate like a conventional automatic transmission. ! To decrease the speed (by the “RES/SET” switch) Except U.S.-spec. models The set speed can be increased 1 km/h each time by pressing the “RES/SET” switch to the “RES” side quickly. ! To increase the speed (by accelerator pedal) 1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Press the “RES/SET” switch to the “SET” side once. Now the desired speed is set and the vehicle will keep running at that speed without depressing the accelerator pedal. NOTE CVT models: . If you depress the accelerator pedal while the Sport Sharp (S#) mode is selected, the select lever/gear position indicator may change from the “D” indication to the current gear position indication. . If you depress the accelerator pedal fully while the Intelligent (I) mode or the each time by pressing the “RES/SET” switch to the “SET” side quickly. ! To decrease the speed (by brake pedal) 1. Depress the brake pedal to release cruise control temporarily. 2. When the speed decreases to the desired speed, press the “RES/SET” switch to the “SET” side once. Now the desired speed is set and the vehicle will keep running at that speed without depressing the accelerator pedal. & Cruise control indicator Refer to “Cruise control indicator” F3-32. & Cruise control set indicator Press the “RES/SET” switch to the “SET” side and hold it until the vehicle reaches the desired speed. Then, release the switch. The vehicle speed at that moment will be memorized and treated as the new set speed. U.S.-spec. models The set speed can be lowered 1 mph (1.6 km/h) each time by pressing the “RES/ SET” switch to the “SET” side quickly. Except U.S.-spec. models The set speed can be lowered 1 km/h Refer to “Cruise control set indicator” F332.