Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 348

Starting and operating/Driver’s Control Center Differential (C.DIFF/DCCD) (STI)

the “AUTO [+]” mode. After setting the
mode, “AUTO [+]” appears.

& Manual mode

Pull the control switch rearward to select
the “AUTO [−]” mode. After setting the
mode, “AUTO [−]” appears.

In the manual mode, you can use the
center differential control switch to adjust
the initial LSD torque as desired. When
this mode is selected, the “AUTO” indicator disappears.

When the “AUTO [+]” mode is selected,
pull the control switch rearward to change
to the “AUTO” mode. When the “AUTO
[−]” mode is set, push the control switch
forward to change to the “AUTO” mode.

7-21

! Center differential control switch
and indicator

The control switch is located beside the
parking brake lever. By pushing the
control switch forward or pulling it rearward, it is possible to change the initial
LSD torque.
The center differential indicator on the
combination meter gives six levels of
indication. The indicator and control
switch are linked; when the switch is
pushed or pulled to change the initial
LSD torque, the indicator changes accordingly.

– CONTINUED –