Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 280

Audio/USB storage device / iPod® operations

. While an iPod® is connected, the
iPod® cannot be operated using the
click wheel on the iPod® (except some
models).
. When using an iPod® by connecting
it to in-vehicle equipment, the order of
the list items displayed on the invehicle equipment may be different
from that on the iPod®. However, this
does not indicate a malfunction.
. An iPod® battery that is connected
to in-vehicle equipment will be charged
when the ignition switch is in the “ON”
or “ACC” position. However, activation
of the iPod® may be delayed if the
battery charge of the iPod® is low.
. If an iPod® does not activate after
operation, disconnect the connection
cable from the iPod® and reset it. For
the resetting procedure, see the User’s
Guide of the iPod®.
. If an iPod® and the connection cable
are connected improperly, the iPod®
cannot be powered on or will not be
recognized by in-vehicle equipment. In
this case, disconnect the connection
cable from the iPod®, and then connect
it again.

. Depending on the model of iPod®
connected, the “RPT” indicator may
illuminate regardless of the user settings. However, this is not a malfunction.

5-27

. Song title (when using a USB storage device or playing a music with an
iPod®)
. Audiobook name (when playing an
audiobook with an iPod®)
. Date of Podcast (when playing a
podcast with an iPod®)
For details, refer to “Audio screen” F354.
1. Connect a USB storage device/iPod®.
Playback button:
Type A audio

Type B audio

The USB connector is located in the
center console. Use the connector to
connect a USB storage device/iPod®.

& How to play back
NOTE

2. Press the playback button. Each time
you briefly press the button, the mode will
change in the following sequence.
Type A audio:

The following information will be displayed while using a USB storage
device/iPod®.
. Folder name (when using a USB
storage device)
. Album name (when using an iPod®)
. Artist name
– CONTINUED –