Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 269

5-16

Audio/Satellite radio operation (type B audio)

selected as the source.
Turn the “TUNE/TRACK/CH” dial to select
the satellite radio channel.

& Band selection
“XM” button

Push the “XM” button when the radio is off
to turn on the radio.
Push the “XM” button when the radio is on
to select XM1, XM2 or XM3 reception
mode.

& Channel and category selection
! Channel selection

“CH” dial

Turn the “CH” dial clockwise to select the
next channel and turn the “CH” dial
counterclockwise to select the previous
channel.

! Category selection
“PTY/CAT” button

To activate the category search mode,
press the “PTY/CAT” button. To deactivate
the category search mode, press the
“PTY/CAT” button again.
When in the category search mode, press
the following button to change the category up or down.
Category up by one
step
Category down by
one step

When a category is selected, turning the
“TUNE/TRACK/CH” dial selects channels
only within the selected category.
The control function returns to the normal
mode after approximately 8 seconds.
! Channel scan
“SCAN” button

Press the “SCAN” button to change the
radio to the SCAN mode. In this mode,
under the selected category, the radio

scans through the channel until a station
is found. The radio will stop at the station
for 5 seconds while displaying the channel
number, after which scanning will continue
until the entire channel has been scanned.
Press the “SCAN” button again to cancel
the SCAN mode and to stop on any
displayed channel.

& Channel preset
! How to preset channels
1. Press the “XM” button to select the
preferred reception mode.
2. Select the desired channel.
3. Press and hold one of the preset
to
) for more
buttons (from
than 1.5 seconds to store the channel. If
the button is pressed and held for less
than 1.5 seconds, the preceding selection
will remain in memory.

NOTE
. Up to six channels for each reception mode may be preset.
. If the connection between the radio
and battery is broken for any reason
such as vehicle maintenance or radio
removal, all channels stored in the
preset buttons are cleared. If this
occurs, it is necessary to reset the