Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 226

Instruments and controls/Turn signal lever

level, the high beam headlights that
have illuminated at reduced brightness
turn off, and the low beam headlights
turn on alternatively. At this time, the
instrument panel illumination, front
side marker lights, tail lights and
license plate lights are also illuminated.

Turn signal lever

To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
will return automatically. If the lever does
not return after cornering, return the lever
to the neutral position by hand.
To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The turn signal
indicator lights will flash in the direction of
the turn or lane change. The lever will
return automatically to the neutral position
when you release it.

3-101

Illumination brightness control

You can adjust the illumination brightness
of the combination meter, the climate
control panel, etc. by turning the control
dial.
. To brighten, turn the control dial upward.
. To darken, turn the control dial downward.

NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the automatic dimming function does not work
at all.
– CONTINUED –