Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 140

Instruments and controls/Warning and indicator lights

front passenger’s seat is empty or it is
deactivated even when the front passenger has not fastened his/her seatbelt),
take the following actions.
. Ensure that no article is placed on the
seat other than a child restraint system
and its child occupant, although we
strongly recommend that all children sit
in the rear seat properly restrained.
. Ensure that there is no article left in the
seatback pocket.
. Ensure that the backward-forward position and seatback of front passenger’s
seat are locked into place securely by
moving the seat back and forth.
If still the seatbelt warning device for front
passenger’s seat does not function correctly after taking relevant corrective actions described above, immediately contact your SUBARU dealer for an inspection.

& SRS airbag system
warning light

For details about the SRS airbag system
warning light, refer to “SRS airbag system
monitors” F1-56.

WARNING
If the warning light exhibits any of
the following conditions, there may
be a malfunction in the seatbelt
pretensioners and/or SRS airbag
system. Immediately take your vehicle to your nearest SUBARU dealer
to have the system checked. Unless
checked and properly repaired, the
seatbelt pretensioners and/or SRS
airbag will not operate properly in
the event of a collision, which may
increase the risk of injury.
. Flashing or flickering of the warning light
. No illumination of the warning
light when the ignition switch is
first turned to the “ON” position
. Continuous illumination of the
warning light
. Illumination of the warning light
while driving

3-15

& Front passenger’s frontal
airbag ON and OFF indicators

ON /
/

: Front passenger’s frontal airbag ON
indicator
: Front passenger’s frontal airbag OFF
indicator

The front passenger’s frontal airbag ON
and OFF indicators show you the status of
the front passenger’s SRS frontal airbag.
The indicators are located next to the
clock in the center portion of the dashboard.
When the ignition switch is turned to the
“ON” position, both the ON and OFF
indicators illuminate for 6 seconds during
which time the system is checked. Following the system check, both indicators turn
off for 2 seconds. After that, one of the
– CONTINUED –