Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 134

Instruments and controls/Meters and gauges

& Canceling the function for
meter/gauge needle movement upon turning on the
ignition switch

& Odometer

3-9

meter will turn off.

& Double trip meter

It is possible to activate or deactivate the
movement of the meter needles and
gauge needles that takes place when the
ignition switch is turned to the “ON”
position. To change the setting, perform
the procedures described in “Gauge Initial
Movement” F3-44.

& Speedometer
The speedometer shows the vehicle
speed. The digital speedometer can be
also displayed on the multi information
display.

The unit displayed varies depending on the
models.
1) Trip knob

This meter displays the odometer when
the ignition switch is in the “ON” position.
The odometer shows the total distance
that the vehicle has been driven.
If you press the trip knob when the ignition
switch is in the “LOCK”/“OFF” or “ACC”
position, the odometer/trip meter will light
up. If you do not press the trip knob within
10 seconds of illumination of the odometer/trip meter, the odometer/trip meter
will turn off.
Also, if you open and close the driver’s
door within 10 seconds of illumination of
the odometer/trip meter, the odometer/trip

1)

Trip knob

This meter displays the two trip meters
when the ignition switch is in the “ON”
position.
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
If you press the trip knob when the ignition
switch is in the “LOCK”/“OFF” or “ACC”
position, the odometer/trip meter will light
up. It is possible to switch between the A
trip meter and B trip meter indications
while the odometer/trip meter is lit up. If
you do not press the trip knob within 10
seconds of illumination of the odometer/
– CONTINUED –