Subaru WRX & WRX STI Manuals 2011 Impreza WRX & WRX STI Owner's Manual | Page 146

3-26

Instruments and controls

& SI-DRIVE indicator light (STI)

& Select lever/gear position indicator (AT models)

& Turn signal indicator
lights

These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to “Replacing bulbs” F11-48.

& High beam indicator
light

1)
2)
3)

Intelligent (I) mode
Sport (S) mode
Sport Sharp (S#) mode

This light indicates the current SI-DRIVE
mode.
For details of SI-DRIVE mode, refer to “SIDRIVE (STI)” F7-28.

& Shift-up indicator light
(STI)

While selecting the Intelligent (I) mode of
SI-DRIVE, this indicator light illuminates
and informs the driver about the upshift
timing for fuel-efficient driving.

When the ignition switch is turned to the
“ON” position, all of the select lever/gear
position indicators illuminate for 2 seconds, and then the indicator shows the
position of the select lever.
When the manual mode is selected, the
gear position indicator (which shows the
current gear selection) and the upshift/
downshift indicator light up. Refer to
“Automatic transmission” F7-22.

This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.

& Cruise control indicator light

This light illuminates when the “CRUISE”
main switch is pressed.

NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch “ON”, the cruise control function is deactivated and the cruise
control indicator light flashes. To reactivate the cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then