Subaru WRX & WRX STI Manuals 2011 Impreza WRX & WRX STI Owner's Manual | Page 102

2-12

Keys and doors

ity reasons. It is recommended that you
have your dealer program all of your
transmitters into your system.

1)

Negative (−) side facing up

3. Replace with a new battery (type
CR2025 or equivalent) making sure to
install the new battery with the negative
(−) side facing up.
4. Refit the removed half of the transmitter case.

! Programming the transmitters
The remote keyless entry system is
equipped with a special code learning
feature that allows you to program new
transmitter codes into the system or to
delete old ones. The system can learn up
to four unique transmitter codes. The four
transmitter codes may be the same or
different.
Programming transmitter codes into
system:

After the battery is replaced, the transmitter must be synchronized with the
remote keyless entry system’s control
unit. Press either the “ ” or “ ” button
six times to synchronize the unit.

& Replacing lost transmitters
If you lose a transmitter or want to
purchase additional transmitters (up to
four can be programmed), you should reprogram all of your transmitters for secur-

Bag containing transmitter

Transmitter circuit board

To register a new transmitter with the
remote keyless entry system, it is necessary to program the transmitter’s code
(identification number) into the system. A
label showing the code is affixed to the
bag containing the transmitter, and another is affixed to the circuit board inside
th RG&