66
Child Restraint Systems
10. To remove the child restraint system, press the release button on the seatbelt buckle and allow the belt to retract completely. The belt will return to the ELR mode.
NOTE
When the child restraint system is no longer in use, remove it and restore the ELR function of the retractor. That function is restored by allowing the seatbelt to retract fully.
& Installing a Booster Seat or Booster Cushion s01ag05
WARNING
NEVER INSTALL A BOOSTER SEAT / CUSHION ON THE FRONT PASSEN- GER’ S SEAT IF THE FRONT PAS- SENGER’ S FRONTAL AIRBAG ON INDICATOR ILLUMINATES. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’ S HEAD TOO CLOSE TO THE SRS AIRBAG.
Booster seat
Booster cushion 1. Adjust the head restraint as follows.
For booster seat:
If the booster seat makes contact with the head restraint, perform the following procedure.
– Except rear center seat: Remove the head restraint.
– Rear center seat: Raise the head restraint to the extended position. If the booster seat still makes contact, remove the head restraint.
For details, refer to“ Head Restraint Adjustment” FP41
CAUTION
Store the removed head restraint in the trunk. Do not place the head restraint in the passenger compartment to prevent it from being thrown