Seatbelts 49 |
||||||||
|
pull it out more slowly.
. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again.
|
! Adjusting the front seat shoulder belt anchor height s01ae060101 |
1 |
||||||
4. Insert the tongue plate into the buckle until you hear a click. |
5. To tighten the lap part, pull up on the shoulder belt.
6. Place the lap belt as low as possible on the hips, not on the waist.
|
Adjust the shoulder belt anchor height to the position best suited for the driver / front passenger. Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck. |
Seat, Seatbelt and SRS Airbags |
|||||
|
To raise:
Pull the release knob and slide the anchor up.
To lower:
Pull the release knob and slide the anchor down.
|
||||||||
Pull down on the anchor to make sure that it is locked in place. |
||||||||
– CONTINUED – |