Replacing Battery 457 |
|||||||||||
|
appear even after you replace the battery, it is possible that another access key fob, other than the one you are holding, is nearby and the warning message is responding to that access key fob. Replace the battery of the second access key fob as well and follow the same procedure.
– Do not perform the warning message clearing procedure while holding two or more access key fobs.
|
& Replacing Battery of Access Key Fob s11bk01
CAUTION
. When removing or fitting the access key fob cover, make sure that the plastic part does not come off or become misaligned.
. Before replacing the battery, remove any static electricity.
|
1 Release button 2 Emergency key
1. Take out the emergency key.
|
3. Take out the battery using a flat-head screwdriver with vinyl tape or a cloth. |
Maintenance and Service
11
|
|||||||
Battery: Button battery CR2032 or equivalent |
2. Wrap a flat-head screwdriver with vinyl tape or a cloth, and insert it in the gap to remove the cover. |
4. Insert a new battery with its positive(+) side facing upward as shown in the figure.
– CONTINUED –
|