Flat Tires 389 |
||||||||
|
NOTE
. After the compressor starts to operate, the air pressure will temporarily rise to 45 psi( 300 kPa, 3.0 kgf / cm 2) or higher. After about 30 seconds when all of the sealant is inside the tire, the air pressure will lower, representing the air pressure in the tire.
. In extremely low temperatures −228F to −48F( −308C to −208C), the viscosity of the sealant increases and the sealant will flow more slowly. In such temperatures, bring the sealant into the vehicle to warm it up before use.
. When mending the tire, if the air pressure gauge is hard to read, turn the compressor switch off once to get an accurate reading.
|
6. Turn the air compressor power switch off when the air pressure reaches the green zone of the air gauge. Remove the power plug from the accessory power socket. |
Remove the hose after filling the tire with air and fasten the valve cap.
CAUTION
The sealant may stain clothing.
|
In Case of Emergency
9
|
|||||
– CONTINUED – |