. After that, you can continue to drive carefully no faster than 50 mph( 80 km / h) and within the maximum distance of 620 miles( 1,000 km). |
||||||||
Inform all other users of the vehicle that the tire has been temporarily sealed with the flat tire repair kit and make them aware of the special driving conditions to be observed. |
||||||||
1. Before starting the tire puncture repair, attach the Tire Mobility Kit label to the wheel that you are going to repair. |
2. Attach the speed limit label in the position shown in the illustration.
WARNING
Do not attach the speed limit label in a position where the label hides the warning lamp or on the steering wheel. It may interfere with the normal operation of the airbag and lead to a critical failure.
|
3. Attach the sealant bottle to the air compressor as shown in the figure and then turn the bottle clockwise 90 degrees to secure it.
CAUTION
. Make sure that the air compressor switch is OFF.
. The sealant may leak if the fitting is not tight enough.
|
In Case of Emergency
9
|
|||||
– CONTINUED – |