280
Starting and Stopping Engine
! MT models s07be0301
1. Carry the access key fob, and sit in the driver’ s seat.
2. Apply the parking brake. 3. Shift the shift lever to neutral. 4. Depress the brake pedal.
5. Depress the clutch pedal until the indicator on the push-button ignition switch turns green.
6. While depressing the clutch pedal, press the push-button ignition switch.
! CVT models s07be0304
1. Carry the access key fob, and sit in the driver’ s seat.
2. Make sure the parking brake is applied.
3. Make sure the select lever is in the“ P” position. The engine can also start when the select lever is in the“ N” position, however, for safety reasons, start in the“ P” position.
4. Depress the brake pedal until the operation indicator on the push-button ignition switch turns green. When starting with the select lever in the“ N” position, the indicator does not turn green.
5. While depressing the brake pedal, press the push-button ignition switch.
NOTE
. While pressing the select lever button in, the indicator on the pushbutton ignition switch will not turn green even when the select lever is in the“ P” position.
. When the engine is not started, the brake pedal may feel stiff. In such a case, depress the brake pedal more forcefully than usual. Check that the operation indicator on the pushbutton ignition switch turns green, and press the push-button ignition switch to start the engine.
! In case of the engine does not start by the normal engine start procedure s07be0305
1. Move the shift lever to the neutral position( MT models), or move the select lever to the“ P” position( CVT models).
2. Switch the power status to“ ACC”.
3. Press and hold the push-button ignition switch for at least 15 seconds with the clutch pedal( MT models)/ brake pedal( CVT models) depressed.
Although the engine may start, only use this procedure in the case of an emergency. If the engine still does not start, refer to“ Starting Engine” FP402.
& Automatic Vehicle Shut Down Function s07be10
WARNING
When the automatic vehicle shut down function is activated, ignition turns to off and the climate control system stops operating. Therefore, do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.
This vehicle has a function to automatically stop the engine if it is left in the following state for about 30 minutes while the engine is running.
. The select lever is in the“ P” position( CVT models).
. The vehicle is stopped.
If the engine stops automatically, the ignition switch turns to the“ OFF” position.