Bluetooth ® SETTINGS
CONNECTING MANUALLY
When the auto connection has failed, it is necessary to connect Bluetooth phones / devices manually.
Follow the“ CONNECTING OR DISCONNECTING Bluetooth PHONE / DEVICE”.( →P. 62)
RECONNECTING THE Bluetooth PHONE / DEVICE
If a Bluetooth phone / device is disconnected due to poor reception from the Bluetooth network when the ignition switch is turned to the“ ACC” or“ ON” position, the system automatically reconnects the Bluetooth phone / device.
●●
If a Bluetooth phone / device is disconnected on purpose, such as turning it off, this does not happen. Reconnect the Bluetooth phone / device manually.
DELETING Bluetooth PHONES / DEVICES
1. |
Select |
. |
2. |
Select Delete( Delete). |
3. |
Select |
for the Bluetooth phone / device you wish to |
|
delete. |
|
4. |
Select OK( OK) when the confirmation message appears. |
NOTE
llThe Bluetooth phone / device will still contain information from this system even after the Bluetooth phone / device has been deleted. Operate the Bluetooth phone / device to delete the system information saved inside the Bluetooth phone / device.
NOTE llWhen a Bluetooth phone / device is registered to the profile of a driver, a message may be displayed asking if the change of profile to the driver is desired.( →P. 67)
64