Subaru WRX Manuals 2025 WRX Owner’s Manual | Page 55

Seatbelts 47
5 . To tighten the lap part , pull up on the shoulder belt .
6 . Place the lap belt as low as possible on the hips , not on the waist .
! Adjusting the front seat shoulder belt anchor height s01ae060101
Adjust the shoulder belt anchor height to the position best suited for the driver / front passenger . Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck .
WARNING
When wearing the seatbelts , make sure the shoulder portion of the webbing does not pass over your neck . If it does , adjust the seatbelt anchor to a lower position . Placing the shoulder belt over the neck may result in neck injury during sudden braking or in a collision .
! Unfastening the seatbelt
s01ae060102
1
Seat , Seatbelt and SRS Airbags
To raise :
Pull the release knob and slide the anchor up .
To lower :
Pull the release knob and slide the anchor down .
Pull down on the anchor to make sure that it is locked in place .
1 Button
1 . Push the button on the buckle .
2 . Retract the seatbelt slowly to prevent it from getting tangled or twisted .
– CONTINUED –