402
Access Key Fob – If Access Key Fob Does Not Operate Properly
“ ACC”. Under other conditions:“ ON”
5. When the keyless access with pushbutton start system is deactivated, press the push-button ignition switch with the brake pedal( all models) and the clutch pedal( MT models) released. The status of the push-button ignition switch then changes to“ ON”.
NOTE
If the engine does not start even though the above procedure was followed precisely, contact your SUBARU dealer.
NOTE
If the power does not switch even though the above procedure was followed precisely, contact your SUBARU dealer.
& Starting Engine s09ap03
1. Apply the parking brake.
2. Shift the shift lever to neutral( MT models) or the select lever into the“ P” position( CVT models).
3. Depress the brake pedal( all models). 4. Depress the clutch pedal( MT models).
5. Hold the access key fob with the buttons facing you, and touch the push-button ignition switch with it. When the communication between the access key fob and the vehicle is completed, a chime( ding) will sound. At the same time, the push-button ignition switch turns to the“ ACC” or“ ON” position.
6. After the push-button ignition switch turns to the“ ACC” or“ ON” position, while depressing the brake pedal( all models) and the clutch pedal( MT models), press the push-button ignition switch.