290
Manual Transmission
1 Slider
3. To shift into the“ R” position, hold up the slider, move the lever to the“ R” position, then release the slider.
4. Gradually release the clutch pedal.
If it is difficult to shift into gear, put the transmission in neutral, release the clutch pedal momentarily, and then try again.
WARNING
. Do not drive the vehicle with the clutch disengaged( i. e., when the clutch pedal is depressed) or with the shift lever in the neutral position. Engine braking has no effect in either of these conditions and the risk of an accident is consequently increased.
. Do not engage the clutch( i. e., release the clutch pedal) suddenly when starting the vehicle. By doing so the vehicle might unexpectedly accelerate or the transmission could malfunction.
CAUTION
Shift into reverse ONLY when the vehicle has completely stopped. It may cause damage to the transmission to try shifting into reverse when the vehicle is moving.
& Shifting Speeds s07af01
! Recommended shifting speeds s07af0101
The best compromise between fuel economy and vehicle performance during normal driving is ensured by shifting up at the speeds listed in the following table.
Shift up mph( km / h) 1st to 2nd 15( 24) 2nd to 3rd 25( 40) 3rd to 4th 40( 64) 4th to 5th 45( 72) 5th to 6th 50( 80)
& Driving Tips WARNING s07af02
When shifting down a gear, ensure that the engine speed does not enter the red zone. Failure to observe this precaution can lead to engine overrevving and this in turn can result in engine damage.
In addition, sudden application of engine brakes when the vehicle is travelling on a slippery surface can lead to wheel locking; as a consequence, control of the vehicle may be lost and the risk of an accident