Starting and Stopping Engine 281 |
||||||||
|
! How to deactivate the Automatic Vehicle Shut Down function s07be1002
The Automatic Vehicle Shut Down function can be temporarily disabled using the center information display settings. For details, refer to“ Car settings” FP200.
If you disable the Automatic Vehicle Shut Down function, it will not work and the engine will continue to run.
The Automatic Vehicle Shut Down function will be enabled the next time you turn the ignition switch to the“ OFF” position and restart the engine.
|
& Stopping Engine s07be04
1. Stop the vehicle completely.
2. Move the select lever to the“ P” position( CVT models).
3. Press the push-button ignition switch. The engine will stop, and the power will be switched off.
WARNING
. Do not touch the push-button ignition switch during driving.
When the push-button ignition switch is operated as follows, the engine will stop.
– The switch is pressed and held
|
for 3 seconds or longer.
– The switch is pressed briefly 3 times or more in succession.
When the engine stops, the brake booster will not function. A greater foot pressure will be required on the brake pedal.
The power steering system will not operate either. A greater force will be required to steer, and it may result in an accident.
. If the engine stops during driving, do not operate the push-button ignition switch or open any of the doors until the vehicle is stopped in a safe location. It is dangerous because the steering lock may be activated. Stop the vehicle in a safe place, and contact a SUBARU dealer immediately.
|
CAUTION
For CVT models:
. Do not stop the engine while the select lever is in a position other than the“ P” position.
. If the engine is stopped while the select lever is in a position other than the“ P” position, the power
|
will be in“ ACC”. If the vehicle is left in this condition, the battery may be discharged.
NOTE
Although you can stop the engine by operating the push-button ignition switch, do not stop the engine during driving except in an emergency.
& When Access Key Fob Does Not Operate Properly s07be05
Refer to“ Access Key Fob – If Access Key Fob Does Not Operate Properly” FP401.
& Steering Lock s07be07
After stopping the engine and any door is opened, the steering wheel will be locked due to the steering lock function.
When the engine is restarted, the steering lock will be automatically released.
|
7
Starting and Operating
|
|||
– CONTINUED – |