224
Turn Signal Lever
3-14. Turn Signal Lever
1 Right turn 2 Lane change right signal 3 Lane change left signal 4 Left turn s03ai
If the lever does not return after cornering, return the lever to the neutral position by hand.
To signal a lane change, push the turn signal lever up or down slightly and hold it during the lane change. The lever will return automatically to the neutral position when you release it.
& One-Touch Lane Changer s03ai01
To flash the turn signal and turn signal indicator light three times, push the turn signal lever up or down slightly and immediately release it.
NOTE
The operational / non-operational setting of the one-touch lane changer can be changed by a SUBARU dealer. Contact the nearest SUBARU dealer for details. The setting can also be changed by operating the center information display. For details, refer to“ Car settings” FP200.
3-15. Wiper and Washer
WARNING s03am
In freezing weather, do not use the windshield washer until the windshield is sufficiently warmed by the defroster.
Otherwise the washer fluid can freeze on the windshield, blocking your view.
CAUTION
. Do not operate the washer continuously for more than 10 seconds, or when the washer fluid tank is empty. This may cause overheating of the washer motor. Check the washer fluid level frequently, such as at fuel stops.
. Do not operate the wipers when the windshield is dry. This may scratch the glass, damage the blade rubbers and might cause the wiper motor to fail. Before operating the wiper on a dry windshield, always use the windshield washer.