178
Combination Meter Display
& Basic Operation s03bn01
Control switches A 4.2-inch display models B 12.3-inch display models 1 2 / 3
By operating or of the control switches, the screens can be changed.
If there are some useful messages, such as vehicle information, warning information, etc., they will interrupt the current screen, and appear on the display accompanied by a beep. If such a screen is displayed, take proper action according to the message shown on the screen.
The warning screen will return to the original screen after a few seconds. While
the information reminder is shown on the display, it may be possible to display the warning screen again. To recall the message marked with on the display, pull the / switch on the steering wheel toward you.
NOTE
If the warning screen does not disappear even after you follow the onscreen instructions, contact your SUBARU dealer to have the vehicle inspected immediately.
& Welcome Screen( Opening Animation) and Good-Bye( Ending Animation) Screen
s03bn08
Welcome screen and Good-bye screen are motion graphic displayed on the combination meter display and center information display upon entering and exiting the vehicle.
When the driver’ s door is opened and closed after unlocking the door, the welcome screen( opening animation) will appear on the combination meter display for approximately 20 seconds.
When the ignition switch is turned to the“ OFF” position, the combination meter display gradually turns off by showing good-bye screen( ending animation).
NOTE
. The welcome screen and the goodbye screen may differ in the actual words and appearance.
. The basic screen will be shown when the ignition switch is turned to the“ ON” position while the welcome screen is displayed.
. Once the welcome screen appears, it takes a certain period of time to display it again.
. If the ignition switch is operated after unlocking the driver’ s door, the welcome screen will not appear even when the driver’ s door is opened and closed.
. The welcome screen will disappear when you lock the driver’ s door by using the remote keyless entry system or the keyless access function while the welcome screen is displayed.
. The welcome screen including the audio / navigation unit can be set to on or off.
. The welcome screen can be set to on or off. For details, refer to“ General settings” FP195.
. The good-bye screen can be set to on or off. For details, refer to“ General settings” FP195.