Start / Stop engine
Push-button ignition switch ( if equipped )
Operation indicator
To stop engine :
To start engine :
STEP1 : Stop the vehicle completely . STEP2 : Move the select lever to the P position ( CVT models ). STEP3 : Press the push-button ignition switch .
STEP1 : Carry the access key fob , and sit in the driver ’ s seat . STEP2 : Apply the parking brake .
STEP3 : Shift the select lever in the P position ( CVT models ) or shift lever in neutral ( MT models ).
STEP4 : Depress the brake pedal ( CVT models ) or the brake pedal and clutch pedal ( MT models ) until the indicator on the push-button ignition switch turns green .
STEP5 : While depressing the brake pedal ( CVT models ) or the brake pedal and clutch pedal ( MT models ), press the push-button ignition switch .
Change of the power supply ( Without starting engine )
Every time the button is pressed without depressing the brake pedal ( CVT models ) or the clutch pedal ( MT models ), the power is switched in the sequence of OFF➞ACC➞ON➞OFF .
OFF ( Turned off ) ACC ( Orange ) ON ( Orange )
Ignition switch ( if equipped )
Electronic parking brake switch ( if equipped )
Release
The key can be turned from ACC to LOCK only when the key is pushed in while turning it and the select lever is in the P position .
Apply
5