452
Battery
& Window Wiper Blade Rubber s11az05
Replace the wiper blade rubber according to the following procedure .
1 . Pull the wiper blade rubber until the slit on the underside of the wiper blade is in the removal position , as shown in the illustration , so that it can be removed .
2 . Pull the end of the wiper blade rubber through the slit to remove it .
3 . To install a new wiper blade rubber , perform the removal procedure in the reverse order . After installation , check that the tip of the wiper rubber has reached the end of the cap .
NOTE
It may be difficult to perform the wiper blade rubber replacement . We recommend that you contact your SUBARU dealer for wiper blade rubber replacement if necessary .
11-26 . Battery
WARNING s11ba
. Before beginning work on or near any battery , be sure to extinguish all cigarettes , matches , and lighters . Never expose a battery to an open flame or electric sparks . Batteries give off a gas which is highly flammable and explosive .
. For safety , in case an explosion does occur , wear eye protection or shield your eyes when working near any battery . Never lean over a battery .
. Do not let battery fluid contact eyes , skin , fabrics , or paint because battery fluid is a corrosive acid . If battery fluid gets on your skin or in your eyes , immediately flush the area with water thoroughly . Seek medical help immediately if acid has entered the eyes .
If battery fluid is accidentally swallowed , immediately drink a large amount of milk or water , and seek medical attention immediately .