386
Flat Tires
12 . Put on the spare tire . Replace the wheel nuts . Tighten them by hand .
WARNING
Do not use oil or grease on the wheel studs or nuts when the spare tire is installed . This could cause the nuts to become loose and lead to an accident .
13 . Turn the jack handle counterclockwise to lower the vehicle .
14 . Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque , following the tightening order in the illustration . For the wheel nut tightening torque , refer to “ Tires ” FP472 . Never use your foot on the wheel nut wrench or a pipe extension on the wrench because you may exceed the specified torque . Have the wheel nut torque checked at the nearest automotive service facility .
1 Support holder
15 . Store the flat tire in the spare tire compartment . Install with the support holder facing upward and secure the flat tire by firmly tightening the attaching bolt .
NOTE
If you cannot fix the flat tire firmly , try turning the support holder upside down .
16 . Store the jack , jack handle and wheel nut wrench in their storage locations .
WARNING
Never place a tire or tire changing tools in the passenger compartment after changing wheels . In a sudden stop or collision , loose equipment could strike occupants and cause injury . Store the tire and all tools in the proper place .
& Sealing a Flat Tire ( Models with the Flat Tire Repair Kit )
s09ac03
WARNING
Read these instructions and warnings carefully before sealing a flat tire .
Compliance with these instructions is vital to ensuring vehicle safety . Noncompliance with these instructions means risking tire damage , which can affect vehicle handling and lead to loss of vehicle control . This may result in serious injury or death .
If the tire is punctured , you can seal the flat tire temporarily by using the flat tire repair kit . You can seal a flat tire caused , for