236
Mirrors
3-18 . Mirrors s03ap
Always check that the inside and outside mirrors are properly adjusted before you start driving .
& Inside Mirror ( without Auto- Dimming Function ) ( If Equipped ) s03ap08
& Auto-Dimming Mirror / Compass ( If Equipped ) s03ap12
! To Operate the Compass Feature s03ap1202
1 . To turn the compass feature on / off , press and hold the “ ” switch for more than 3 seconds or until the display turns on / off . The compass feature will default to on with each ignition cycle .
2 . If the display reads “ C ”, slowly drive the vehicle in circles until compass is calibrated .
1 Normal position 2 Anti-glare position
Push the tab on the mirror for normal use . To reduce glare from the headlights of the vehicle behind you , pull the tab to the antiglare position .
1 Compass 2 Switch
During nighttime driving , the auto-dimming feature senses distracting glare from vehicle headlights behind you and automatically dims to eliminate the glare and preserve your vision .
! To Operate the Auto-Dimming Feature s03ap1201
Press the “ ” switch to turn the autodimming feature on / off . The auto-dimming feature is enabled when the switch ’ s green LED indicator is on . The auto-dimming feature will default to on with each ignition cycle .
Compass calibration zones
3 . To adjust for compass zone variance : ( 1 ) Find your current location and zone number on the map .
( 2 ) Press and hold the “ ” switch for more than 6 seconds or until a zone number appears in the display .