Advanced Adaptive Cruise Control
■ How to use Adaptive Cruise Control
●Setting Adaptive Cruise Control
( 1 ) Setting Adaptive Cruise Control to standby status Press the ( CRUISE ) switch . At this time , ( Adaptive Cruise Control indicator ) ( white ), your vehicle indicator and the following distance setting indicator are displayed on the EyeSight display area of the combination meter display . The set vehicle speed display will read “ - - MPH ( - - - km / h )”.
Following distance setting indicator
Adaptive Cruise Control indicator ( white )
H00067 H00270
To set the ready status : Adaptive Cruise Control can be activated when all of the following conditions are met and ( READY indicator ) is displayed on the EyeSight display area . - All doors ( except the trunk ) are closed . - The driver ’ s seatbelt is fastened . - The electronic parking brake is not engaged . The electronic parking brake indicator light is turned off .
- The select lever is in the “ D ” or “ M ” position .
READY indicator
H00271
- |
The brake pedal is not depressed while driving or the brake pedal is strongly |
|
depressed while stopping . |
|
- |
EyeSight operation is not temporarily stopped . |
( EyeSight temporary stop indicator |
|
: White ) is turned off .
� Page 154
|
|
72