Instruments and controls
3-23
Outside temperature indicator
NOTE
If your vehicle is equipped with a
genuine SUBARU navigation system,
refer to the Owner’s Manual supplement for the navigation system.
To adjust the time shown by the clock,
press the “+” button or the “−” button. The
indicated time will change in 1-minute
increments. If you keep the button
pressed, the rate at which the indicated
time changes will speed up.
When you keep either the “+” or “−” button
pressed, time change will pause for 1
second at the end of each 30-minute
change. The clock will start going forward
or backward again quickly after this 1second pause.
CAUTION
To ensure safety, do not attempt to
set the time during driving, as an
accident could result.
Except U.S.-spec. models
The outside temperature indicator shows
the outside temperature in a range from
−22 to 1228F (−30 to 508C) when the
ignition switch is in the “ON” position.
U.S.-spec. models
The indicator can give a false reading
under any of the following conditions.
. When there is too much sun.
. During idling; while running at low
speeds in a traffic jam; when the engine
is restarted immediately following a shutdown.
. When the actual outside temperature
falls outside the specified indicator range.
– CONTINUED –