Subaru Tribeca Manuals: 2014 Tribeca Owner's Manual | Page 152

Instruments and controls after the engine is started but turns off immediately, remaining off. . The warning light illuminates after the engine has started and turns off while the vehicle is subsequently being driven. . The warning light illuminates during driving, but it turns off immediately and remains off. ! Vehicle Dynamics Control operation indicator light U.S.-spec. models and Canada-spec. models: The indicator light flashes during activation of the skid suppression function and during activation of the traction control function. NOTE . The light may remain illuminated for a short period of time after the engine has been started, especially in cold weather. This does not indicate the existence of a problem. The light should turn off as soon as the engine has warmed up. . The indicator light illuminates when the engine has developed a problem and the CHECK ENGINE warning light/ malfunction indicator light is on. Latin America-spec. models: The indicator light flashes when the skid suppression function is activated. It illuminates when only the traction control function is operating. The Vehicle Dynamics Control system is probably malfunctioning under any of the following conditions. Have your vehicle checked at a SUBARU dealer as soon as possible . . The light does not illuminate when the ignition switch is turned to the “ON” position. . The light does not turn off even after the lapse of several minutes (the engine has warmed u