Subaru Tribeca Manuals: 2013 Tribeca Owner's Manual | Page 389

Specifications Wattage 1) High beam headlight 2) Bulb No. 12V-60W HB3 12V-35W D1S Low beam headlight Models with HID light Models with halogen light 12V-55W H7 12V-28/8W 2357NA 3) Front turn signal/Parking light 4) Parking/Front side marker light 12V-5W 168(W5W) 5) Map light 12V-8W – 6) Dome light Models with Rear Seat Entertainment 12V-5W – Models without Rear Seat Entertainment 12V-8W – – 7) Door step light 12V-3W 8) Vanity mirror light 12V-3W 9) Fog light 12V-55W H3 10) Cargo area light 12V-13W 912 11) Tail light 12V-5W 168(W5W) 12) Stop light/Tail light 12V-27/8W 1157(W27/8W) 13) Rear turn signal light 12V-27W 1156(W27W) 14) Backup light 12V-16W 921(W16W) 15) Rear gate light 12V-5W (W5W) 16) A) License plate light 12V-5W – High-mounted stop light – . Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the bulbs and wait until the bulbs cool down. Otherwise, there is a risk of sustaining a burn injury. . For models with HID low beam headlights, observe the following precautions. Not doing so carries the risk of an electric shock that could result in serious injury because the HID bulbs use an extremely high voltage. – Do not replace any headlight bulbs (both low beam and high beam) by yourself. – Do not remove/restore the headlight assemblies by yourself. – Do not remove any headlightassembly components by yourself. For replacement, contact your SUBARU dealer. – B) WARNING 168(W5W) Side turn signal light 12-13 – – CONTINUED –