Subaru Tribeca Manuals: 2013 Tribeca Owner's Manual | страница 369

Maintenance and service NOTE 11-37 6. Reconnect the electrical connector. 7. Install the bulb cover with the fixing screws. 8. Install the air intake duct with the clips. . If headlight aiming is required, consult your SUBARU dealer for proper adjustment of the headlight aim. . It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. NOTE Contact your SUBARU dealer for the bulb replacement of the left-hand side. ! Low beam light bulbs (right-hand side) ! High beam light bulbs 2. Use a screwdriver to remove the bulb cover. 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct. Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 3. Disconnect the electrical connector. 4. Remove the retainer spring. 5. Replace the bulb, then set the retainer spring securely. – CONTINUED –