1-4
Seat, seatbelt and SRS airbags
To adjust the seat cushion angle, pull up
or push down the front end of the control
switch.
! Seat height adjustment (driver’s
seat)
. Angle of seatback
. Angle of seat cushion
. Height of seat
! Registration of seat position
WARNING
. Never adjust the seat while driving to avoid the possibility of
loss of vehicle control and of
personal injury.
. Before adjusting the seat, make
sure the hands and feet of rear
seat passengers or luggage are
clear of the adjusting mechanism.
To adjust the seat height, pull up or push
down the rear end of the control switch.
& Memory function (driver’s
seat – if equipped)
Two of your favorite seat positions can be
registered. Register the seat position with
button “1” or “2” and retrieve the seat
position by pressing either button.
The following seat positions can be
registered.
. Forward/backward position of the seat
1. With the select lever in the “P” position, adjust the seat position.
2. While pressing the “SET” button, press
the desired button “1” or “2”.
3. The chime sounds once, and the seat
position is registered.
! Retrieval of seat position
WARNING
. Never retrieve the seat position
while driving to avoid the possibility of loss of vehicle control
and of personal injury.
. Perform the seat position retrieval before driving. Be sure to
confirm that the select lever
position is in the “P” position.
Do not drive until the retrieval of
the seat position is complete.