2-9. Vehicle settings
the power switch while the software is installing, installation will resume the next time the vehicle is started.
● Once the update is complete, a message is displayed on the screen.
● If the system needs to be restarted, a message will appear. Touching [ Yes ] restarts the system.
● To check the software update history, touch [ History ] on the software update history screen.
INFORMATION
● If critical update data is available on the distribution server, a message will be displayed. Touch [ OK ] to download the update data.
● The following conditions must be met to use Wi-Fi ® to update the software:
• The Wi-Fi ® function is turned on.
• The vehicle must be in a location where it can access Wi-Fi ®
• The system must be connected to a Wi-Fi ® access point( e. g. home, work, etc.)
● A USB update process may be used if a DCM or Wi-Fi ® update is not possible.
Updating the software using a USB flash drive * 1
■ Copying the update data to a USB flash drive
1. Touch [ ] on the main menu. 2. Touch [ Software update ] on the sub menu.
3. Insert the USB flash drive into the USB Type-C port on the vehicle.
4. Touch [ Output info to USB memory ].
The vehicle information to update the software is copied to the USB flash drive.
5. Touch [ OK ] to remove the USB flash drive.
6. Insert the USB flash drive with the copied vehicle information into the USB Type-C port on a computer.
* 1: This function is not available in some regions.
78