8-2. Panoramic view monitor
Symptom Symptom Solution
The screen is difficult to see
The image is blurry
The screen is misaligned
The guide lines are significantly misaligned
● The vehicle is in a dark area or it is night.
● The temperature around the lens is either high or low.
● The outside temperature is low.
● There are water droplets on the camera.
● It is raining or humid.
● Foreign matter( mud etc.) is stuck to the camera.
● Sunlight or headlights are shining directly into the camera.
● The vehicle is under fluorescent lights, sodium lights, mercury lights, etc.
Dirt or foreign matter, such as water droplets, snow, or mud, has stuck to the camera lens.
The camera has received a strong impact.
The camera position is misaligned.
Visually check the vehicle’ s surroundings while you are driving.
Use the panoramic view monitor again once the camera and conditions have improved.
The procedure for adjusting the picture quality of the panoramic view monitor is the same as the procedure for adjusting the multimedia screen.
Splash the camera with a large amount of water and then wipe the camera lens clean with a soft, damp cloth.
Have the vehicle inspected by your SUBARU dealer.
Have the vehicle inspected by your SUBARU dealer.
296