3-1. Using the Bluetooth ® function
Precautions when using Apple CarPlay and Android Auto( P. 120)
Registering from a Bluetooth ® device
If the Bluetooth ® device cannot be found by searching with the multimedia system, register by searching for the multimedia system from the Bluetooth ® device.
1 Touch [ ] from the main menu. 2 Touch [ Bluetooth & Devices ] on the sub menu. If no device is registered, proceed to Procedure 4.
3 Touch [ Add another device ].
While a device is connected to the multimedia system, the confirmation screen for disconnecting the device may be displayed. Disconnect the device to perform registration.
4 Register the multimedia system from the Bluetooth ® device to be used.
● Perform the operation according to the operating procedure of the Bluetooth ® device.
● Be sure to display this Bluetooth ® connection screen before performing registration on the Bluetooth ® device.
5 Check that the displayed PIN code matches the PIN code displayed on the Bluetooth ® device, and then touch [ OK ].
102
● Some Bluetooth ® devices may need to be operated to complete registration.
● When an HFP supported Bluetooth ® device is registered, that device is automatically set as the primary device if the driver does not have a primary device set.
● The Apple CarPlay or Android Auto settings may be displayed. The Apple CarPlay or Android Auto screen will be displayed if the use of either is enabled.
● A message indicating that connection is complete is displayed, and the name of the registered Bluetooth ® device is displayed in the sub menu.
● If an operation failed screen is displayed, follow the operation instructions on the screen.