7-1 . Maintenance and care
481
NOTICE
●Keep the cleaning nozzle at least 11.9 in . ( 30 cm ) away from the vehicle body . Otherwise resin section , such as moldings
and bumpers , may be deformed and damaged . Also , do not continuously hold the nozzle in the
same place .
●Do not spray the lower part of the windshield continuously . If
water enters the air conditioning system intake located near the lower part of the windshield , the
air conditioning system may not operate correctly .
●Do not wash the underside of the vehicle using a high pressure car washer . If water enters the traction battery , the EV system may malfunction .
●Do not use the washer on the area around the charging port lid . Water could get into the charging inlet and could damage the vehicle .
■ Cleaning aluminum parts
When cleaning the hood , do not push hard or put weight on it . The aluminum part may be dented .
Cleaning and protecting the vehicle interior
Perform cleaning in a manner appropriate to each component and its material .
Protecting the vehicle interior
• Remove dirt and dust using a vacuum cleaner . Wipe dirty surfaces with a cloth dampened with lukewarm water .
• If dirt cannot be removed , wipe it off with a soft cloth dampened with neutral detergent diluted to approximately 1 %. Wring out any excess water from the cloth and thoroughly wipe off remaining traces of detergent and water .
■ Shampooing the carpets
There are several commercial foaming-type cleaners available . Use a
sponge or brush to apply the foam . Rub in overlapping circles . Do not use water . Wipe dirty surfaces and
let them dry . Excellent results are obtained by keeping the carpet as dry as possible .
■ Handling the seat belts
Clean with mild soap and lukewarm water using a cloth or sponge . Also check the belts periodically for excessive wear , fraying or cuts .
■ Front side windows with IR protective coating
The front side windows have IR protective coating . To prevent any dam-
7
Maintenance and care